Código de avería P0122 – nan

El código de avería P0122 indica: nan

¿Qué significa el código P0122?

nan

Síntomas del código P0122

• Fallo motor
• Pérdida de potencia
• Testigo encendido

Causas del código P0122

Este código puede estar relacionado con diferentes fallos en el sistema.

Solución del código P0122

Refer to a vehicle specific repair manual to determine the location of the "A" TPS circuit. Some recommended troubleshooting and repair steps are: Carefully check the throttle position sensor (TPS), wiring connector, and wiring for breaks, etc. Repair or replace as necessary Check the voltage at the TPS (refer to a service manual for your vehicle for specific information). If the voltage is too low that is indicative of a problem. Replace if necessary. If recently replaced the TPS may need to be adjusted. On some vehicles the installation instructions call for the TPS to be properly aligned or adjusted, consult a repair manual for specifics. If there are no symptoms at all, the problem may be intermittent and clearing the code may resolve the issue temporarily. If this is the case then you should definitely check the wiring to be sure it’s not rubbing on anything, grounding, etc. The code may come back. TIP: A visitor to our site offered this tip – a P0122 Code can also occur when the TPS is not ROTATED as it is installed. (The tab inside the sensor MUST be touching the rotating pins in the throttle body. In a 3.8L GM engine, this means inserting it with then connector at 12 o’clock before rotating it to 9 o’clock for the final mounting position.) Other TPS sensor and circuit related DTCs: P0120, P0121, P0123, P0124

Preguntas frecuentes

¿Es grave el código P0122?

Depende del vehículo, pero se recomienda revisarlo cuanto antes.

¿Se puede conducir con el código P0122?

No es recomendable durante largos periodos.